Tuesday, January 28, 2020
Requirement Model For Student Monitoring Systems
Requirement Model For Student Monitoring Systems The focus of this study is to get a good requirement model for Student Attendance Monitoring Systems (SAMS) in secondary school. It is aimed at system designer who want to know how to design an efficient SAMS. At the end of this study, a SAMS prototype will be designed based on the requirement model and also analyze user acceptance of this system. A generation ago, either in principle or in practice, attendance was not optional. Today, often in principle and almost in practice, it is optional (Romer, 1993). According to Lim, Sim and Mansor (2009), most educational institutions administrators are concerned about student irregular attendance. Shendell et al. (2004) defines it can affect student in overall academic performance. Romer (1993) found that attendance did contribute significantly to the academic performance of students. There are a slightly stronger relationship between attendance and performance. Also, Durden Ellis (1995) conclude that attendance does matter for academic achievement. Thus, it makes student attendance mandatory in schools (Romer, 1993), (Woltz, 1955). Yet, almost everyone noticed that attendance in schools is far from perfect (Romer, 1993). There have a lack of school attendance data and a lack of consistency in the definition and measurement of non-attendance (Bourke, Rigby Burden, 2000). Large schools are more likely to have problems with student attendance than small ones (Epstein Sheldon, 2002). Everyday, school staffs spends much time to handle students attendance. There are many problems when recording data manually (Richard, 2005). Sometimes, the attendances record books were missing. In real situation, it is hard for school staffs to search students record by looking at attendances record books one by one. School staffs usually spend much time to find the students record especially when there are many classes in the school. Furthermore, parents may miss to get any information or letter from schools when their children didnt attend to school. According to Epstein Sheldon (2002), high school staffs communications with parents about attendance can increased student attendance and reduced chronic absenteeism. Hence, by creating school attendance system is one of the best solutions to address this problem. The system should help school staffs to take attendance for student especially in secondary schools. It must make the process of taking the attendance easier, faster and secure as compared to conventional method. The conventional method of taking attendance by calling names or signing on paper is very time consuming, inefficient, and insecure (Ervasti, Isomursu, Kinnula, 2009), (Lim, Sim Mansor, 2009). It is a one way that helps teachers or school staffs reducing the taken time to carry out routine processes and enable them connected with parents by sending real-time information on their childrens attendance immediately if students are not-attended to school more than the limit. Thus, teacher have more time for teaching. (Ervasti, Isomursu, Kinnula, 2009). Problem Statement In schools, attendance is important and mandatory. Nowadays, due to enlarge of information technology environment, it is efficient to use School Attendance Monitoring System (SAMS) to manage attendance in secondary schools. In recent years, system designers have expands many ways and characteristics in design a good system. The problem of this study is to identify important characteristics to design a good SAMS, set up a requirement model, and build a prototype for testing user acceptance. The requirement model must meet the user needs, goals and constraints in order to determine the important feature, relations and design implications. The requirement must be specify clearly about what and how the SAMS should perform. Objectives To create a SAMSs requirement model for secondary school. To design and build a prototype of SAMS. To help other system developer within related area. Scope The study will be conducted within the Kampar district, Perak. All schools chosen for survey will be secondary schools only. Similarly, there are nine secondary schools in Kampar district (sample size). People who manage secondary school organizations are the only respondents of the study. The population is between 15 to 25 or more school staffs. The particular focus areas of the study would include attendance system which is already used in secondary schools. LITERATURE REVIEW According to Epstein Sheldon (2002), reducing the rates of student chronic absenteeism has been and continues to be a goal of many schools and school systems. In 1999, a student tracking system involving a database is being trialed in government and non-government schools Western Australia (Bourke, Rigby Burden, 2000). The student tracking system involved a set of processes, procedures and systems which can identify and monitor the location of students. In the Torres Strait schools, they used a system called Student Information Management System (SIMS). The SIMS provides a good quality data regarding student attendance. This computer-based system collates individual class attendance records on a weekly basis (Bourke, Rigby Burden, 2000). The relationship between staffs and parents was seen as vitally important by parents and principals. The student survey results indicated that attendance levels were significantly higher among students when teachers got in touch with their parents to talk about how they were going at school (Bourke, Rigby Burden, 2000). Therefore, in schools where students have attendance problems, school staffs may need to go beyond the school building to involve parents in reducing absenteeism (Epstein Sheldon, 2002). Hence, student attendance monitoring system should help school staffs and parents easy to communicate. There are varieties of opportunities for implementing IT in management education. Technology can be used to facilitate the display of information, to increase access to external explicit information, and to increase the sharing and construction of knowledge (Leidner Jarvenpaa, 1995) but some of the use of this technology is not yet widespread, efficient and practical for implementation of data management (Wayman, et. al., 2004). Implementation of an application system can present many unforeseen challenges. The first step toward implementing a student data analysis system should be to thoroughly assess the data, needs, and resources available to a school or district. The successful implementation is important for the long-term development of a data based decision-making climate (Wayman, et. al, 2004). Fig. 1 shows the model for integrated functional requirement which has been explained by Malet et al. (2007) Figure 1: Model for Integrated Functional Requirement In Fig. 1, functions can be linked with specific processes. The technical realization of functions takes place in these processes. Functions can also be related to specific positions in the product structure. As a result of linking the requirements with functions, functions to processes and the product structure, an indirect relation between requirements, processes and the product structure has been established (Malet et al., 2007). There are many views of softwares development or development process though that has evolved over the years. What follows is a brief discussion of the theories of the software development process that recently used today. The first formal description of the software development process model is published in 1970 by Winston W. Royce. Below is one of the software development processs model: Figure 2: Conceptual model of software development process According to Royce (1970), firstly, developer must analyze user requirements. After that, make requirement specifications by clearly set out necessary features of system based on user requirement. Then, developer can design a suitable solution and do implementation by develop the proposed solution. In addition, developer must test the system to ensure that the solution solves the original problem and works in context. Lastly, developer must maintain the system. METHODOLOGY Fig. 3 shows the requirement modeling process which has been explained by Malet et al. (2007) Figure 3: Requirement modeling process The first step is elicitation of requirements. The requirements will be based on collected data. The sites are the secondary school managing departments. The sampling frame will be based on the list of the secondary schools within area of Kampar district, Perak. The sample size will be nine secondary schools. The population is between 15 to 25 or more employees including principal, clerks, and teachers. The method of data collection is by questionnaire and interview. According to Creswell (1994), measurement instrument can helps in get a quantifiable data. A questionnaire will be given to each employee within the sampling to get employees personal details, personal experiences of using any school attendance system, problem with existing attendance system and an opinion or suggestion for the future systems developer. The purpose of the study and how to answer the questionnaire will be explained to the employees under study. During interview session, the informants will be selected ind ividuals within the sample employees who had an experience of using any school attendance system. The second step is analyzing the requirements. All user requirements will be investigated. The data will be analyzed and displayed using SPSS 16.00. The percentage, the mean and statistic formula (ANOVA) will be used when describing the data. It will be interpreted and translated into a form that suitable for other developer (sequence diagram, activity diagram, class diagram etc.). A requirement specifications model will be defined by clearly set out necessary features of SAMS. The third step is managing the requirements. In this step, a prototype of SAMS will be design and built based on user requirement model by using several types of tool such as Dreamweaver CS4, Photoshop CS4 and etc. The programming language that will be used for building the system is PHP. During this system development lifecycle, requirements might be change and evolve. These changes need to be tracked and traced (Malet et al., 2007). Lastly, the fulfillment of requirements needs to be validated with virtual or physical tests. A product is deemed successful (by means of satisfying the customer) if all requirements are fulfilled (Malet et al.,2007). SAMS will be tested to ensure that the solution solves the original problem and integrate the system to make sure that the solution will working in circumstance. The user acceptance testing will be done by choosing user randomly within the sample. Requirements modeling takes place in all phases of product development. More emphasis needs to be put on later development phases such as usage, recycling and maintenance. The knowledge gained in these phases, once included in the development process, can accelerate the development of new products (Malet et al.,2007). EXPECTED FINDINGS At the end of this study, the requirement model can help any system designers to design good SAMS for secondary schools. They will know how to design useful, usable and desirable SAMS such as in the system should contain the right functions, secure and must be user friendly. SAMS should contain all these basic needs of attendance system. Below shows the flow of Students Attendance Monitoring Systems (SAMS): 1 Record attendance 2 Check attendance 3 Process data 4 Save data 5 Send email Figure 4: The flow of Students Attendance Monitoring Systems (SAMS). SAMS should helps school staffs records students attendance, checks either student is present or absent, process the attendance data, save it and send an email to the parents if student was absent more than three days. SIGNIFICANCE The aimed of requirement model for Student Attendance Monitoring System (SAMS) is to help system designer in designing a good attendance system and also conduct them to develop the attendance system in the future. Attendance system are important because can gives many benefit to schools such as security on attendance, reduce work time on taking attendance and create connection between school staffs and parents. CONCLUSION There is no comprehensive and generally accepted manual on how to design good human factors into computer systems (Shackel, 1984) but there are a lot of guideline on how to design a system. However, this requirement model can guide any system designers who want straightly focus to design Student Attendance Monitoring System (SAMS). Creativity and innovation are required to make a great SAMS. The system should be usable. Usability consists of many pieces such as system performance, system functions, user interfaces organization and so on. REFERRENCES Bourke, C. J., Rigby, K., Burden J. (2000). Better Practice in School Attendance: Improving the School Attendance of Indigenous Students. Commonwealth of Australia. 1-62. Creswell, J. W. (1994). Research design. Qualitative and Quantitative Approaches. Thousand Oaks, California: Sage. Durden, G. C. Ellis, L. V. (1995). The Effects of Attendance on Student Learning in Principles of Economics, The American Economic Review, Papers and Proceedings of the Hundredth and Seventh Annual Meeting of the American Economic association Washington, 85(2), 343-346. Epstein, J. L., Sheldon, S. B. (2002). Present and Accounted for: Improving Student Attendance Through Family and Community Involvement. Educational Research and Improvement. 95(5). 308- 318. Ervasti, M., Isomursu, M., Kinnula, M. (2009). Bringing Technology into School NFC-enabled School Attendance Supervision. ACM 978-1-60558-846-9 09 Leidner, D. E. Jarvenpaa S. L. (1995). The Use of Information Technology to Enhance Management School Education: A Theoretical View. MIS Quarterly: Special Issue on IS Curricula and Pedagogy, 19(3), 265-291. Lim, T. S., Sim, S. C. Mansor, M. M. (2009). RFID Based Attendance System, Symposium on Industrial Electronics and Applications (ISIEA 2009), 2, 778-782. Maletz, M., Blouin, J. G., Schnedl, H., Brisson, D., Zamazal, K. (2007). A Holistic Approach for Integrated Requirements Modeling in the Product Development Process. The Virtual Vehicle-Research Center, Graz, Austria. 1-10. Richard, L. (2005). Handling Qualitative Data: A Practical Guide. Thousand Oaks, California: Sage. Romer, D. (1993). Do Students Go to Class? Should They?. Journal of Economics Perspectives, 7(3), 167- 174. Royce, W. W. (1970). Managing the Development of Large Software Systems. Proceedings IEEE WESCON. 1-9. Shackel, B. (984). Information Technology: A challenge to ergonomics and design. Behaviour and Information Technology. 3. 263-275. Shendell, D. G., Prill, R., Fisk, W. J., Apte, M. G., Blake, D. Faulkner, D. (2004). Associations between Classroom CO2 Concentrations and Student Attendance in Washington and Idaho. Lawrence Berkeley National Laboratory: LBNL Paper LBNL-54413. Retrieved from: http://www.escholarship.org/uc/item/88r0924r Wayman, J. C., Stringfield, S., Yakimowski, M. (2004). Software Enabling School Improvement Through Analysis Of Student Data. Research on the Education of Students, 67. Woltz, C. K. (1955). Compulsary Attendance at School. Law and Comtemporary Problems. 20(1), 3-22.
Monday, January 20, 2020
Fiber-optic Communications :: Fiber-optic essays
à à à à à In 1987, both Eli Yablonvitch and Sajeev John got together to discuss research that both had previously discovered. Eli Yablonvitch was an electrical engineer at Bell Communications Research in Red Bank, New Jersey. Yablonvitch was known for refining a laser that would become a mainstay of fiber-optic communications. Sajeev John is a Harvard graduate student who worked on a thesis inspired by Philip Anderson of Princeton. à à à à à The two agreed that the name of their idea should be called a photonic band gap. Phontonic crystals have the regular lattice structure of natural crystals. Their purpose is to try and trap light without destroying it. The trick is to not kill the photons but to tame them, by allowing light out when you want. Microchips are made of semiconductors and a semiconductor is a band gap. A band gap makes is possible to control the flow of electricity in a chip. In order to make light chips, you need the photonic equivalent of silicon: a material that can trap light. ââ¬Å"You need a way of trapping the light so there are no escape channels,â⬠says John. à à à à à It was until 1997, when European investigators succeed in trapping light in a random material. Diederik Wiersma and his colleagues used a powder of gallium arsenide. The laser could not penetrate a layer of powder even when the layer was less than a hundredth of an inch thick. It was indeed the very first time that anyone had trapped light, but as they knew, microchips cannot be made out of powder. à à à à à Yablonovitch was in his office on day in October 1986, ââ¬Å"I started drawing crisscrossing lines, and everywhere the lines crossed I put a heavier mark. Before I knew it I had drawn a checkerboard. And then I said, ââ¬ËWell, I might as well do it in three dimensions.ââ¬â¢Ã¢â¬ This later became known as Yablonovitchââ¬â¢s ââ¬Å"eureka moment.â⬠He realized that what he had drawn was a crystal structure that might trap light through interference. Interference happens when two light waves of the same wavelength meet. à à à à à The Bragg reflection is when light waves pass through one plane but is reflected back by the next plan. All waves that interfere constructively intensify the reflected light. Yablonovitch found that if you could design a crystal that Bragg-reflected light now which direction is was coming from, you would have built a trap.
Sunday, January 12, 2020
Financial Crises Essay
I have literally found a solution for all Americans struggling to mitigate their personal financial crises this day. They cannot just sit back expecting the government and business to work wonders. It is time for them to take personal responsibility for the economic downturn. Orwell (1945) was correct when he wrote that ââ¬Å"All animals are created equal but some animals are more equal than others,â⬠actually referring to human beings whom scientists refer to as animals. Throughout the history of humanity, people have generally known that they were created equal. And yet, there have been separations, discriminations, dissimilarities, and inequalities, for the reason that God, Nature or Evolution ââ¬â depending on what we choose to believe in ââ¬â did not grant equal abilities, talents, and gifts to all human beings. Some men are richer and more intelligent than the others. Some are born deaf, dumb, and blind. And, some must rely on income support because they just cannot beat poverty on their own. Then there are those who neither care that others remain poor nor hold themselves back from buying things they may or may never actually use ââ¬â simply because it is fashionable in our consumer society to purchase unnecessary things as these objects make the individual who purchases them appear as though he or she belongs to a high socioeconomic class (Twitchell). As though this is not ridiculous enough, our consumer society enjoys humorous advertisements about products rather than people as the source of all personal satisfaction (Kilbourne). No wonder the divorce rate is high, compounding personal misery during the current economic recession. Undoubtedly, advertising is a hallmark of capitalism. In other words, it is a representative of Mammon. We generally assume that we cannot imagine a world without advertisements because ads represent the human need to enjoy life to the fullest with the best of food, clothing, etc. But, Kilbourneââ¬â¢s article, ââ¬Å"Jesus is a Brand of Jeans,â⬠reminds us that this need does not have to exist beyond our changeable minds. Yes, it is possible to imagine a world where publicity is meaningless. In this view of the world, everybody must be satisfied, without some of the people envying others, some others enjoying chocolate cake, while the rest grieve because they did not get a piece. Most importantly, in a perfect world we would not have to hoard in order to appear rich and famous to the others. Rather, we would be content with ourselves without feeling the need to impress others with our higher incomes, statuses, etc. If we are able to change our mindsets in our consumer society, we would not even have to save up to attend classes in ââ¬Å"happiness institutesâ⬠(Schumaker). This would definitely lighten our personal financial burdens through this economic mess confronting our nation. Moreover, regardless of what we possess at present ââ¬â if we honestly long to get through our personal financial crises ââ¬â what if we try to share the little that remains with us, be it our skills or funds, with those that are less fortunate? This seems like yet another scientific technique to change the mindset of the consumer society. It is all possible, after all. This is America. Let us get through our personal difficulties with the American Dream formula! It has worked. It still works. It would always work. Sincerely, Name References Kilbourne, J. Jesus is a Brand of Jeans. Chapter 11: Consumer Society. Orwell, G. (1945). Animal Farm. London: Secker and Warburg. Schumaker, J. F. The Happiness Conspiracy: What does it mean to be happy in a modern consumer society? Chapter 11: Consumer Society. Twitchell, J. B. Needing the Unnecessary. Chapter 11: Consumer Society.
Saturday, January 4, 2020
How Modify French Nouns With Adjectives (Adjectifs)
An adjective is a word that modifies a noun by describing it in some way: shape, color, size, nationality, etc. Differences Between French and English Adjectives French adjectives are very different from English adjectives in two ways: French adjectives change to agree in gender and number with the nouns that they modify, which means there can be up to four forms of each adjective:à Adjective: pretty joli Masculine singular joli Feminine singular jolie Masculine plural jolis Feminine plural jolies In English, adjectives are always found in front of the noun, but most French adjectives follow the noun they modify:ââ¬â¹ green book un livre vert smart teacher un professeur intelligent But there are some French adjectives that precede the noun: handsome boy un beau garon small glass un petit verre Agreement of Regular French Adjectives (Accord des adjectifs rà ©guliers) French adjectives change to agree in gender and number with the nouns that they modify, which means there can be up to four forms of each adjective. The different forms for adjectives depend mostly on the final letter(s) of the default form of the adjective, which is the masculine singular. Most French adjectives add E for feminine and S for plural. This rule applies to adjectives that end in most consonants as well as all vowels except the unaccented E. It also includes all regular and most irregularà present participlesà andà past participles: Adjective: green vert Masculine singular vert Feminine singular verte Masculine plural verts Feminine plural vertes Adjective: blue bleu Masculine singular bleu Feminine singular bleue Masculine plural bleus Feminine plural bleues Adjective: funny amusant Masculine singular amusant Feminine singular amusante Masculine plural amusants Feminine plural amusantes Adjective: spicy pic Masculine singular pic Feminine singular pice Masculine plural pics Feminine plural pices When the masculine singular adjective ends in an unaccented E, there is no difference between the masculine andà feminine forms: Adjective: red rouge Masculine singular rouge Feminine singular rouge Masculine plural rouges Feminine plural rouges When the default form of the adjective ends in S or X, there is no difference between the masculine singular andà plural forms: Adjective: grey gris Masculine singular gris Feminine singular grise Masculine plural gris Feminine plural grises While most French adjectives fit into one of the above categories, there are still quite a few that have irregular feminine and/or plural forms. Note:à These rules are the same forà making nouns feminine and plural. Agreement of Irregular French Adjectives Most French adjectives are regular, but there are a number of irregular adjectives, based on the final letter(s) of the masculine singular adjective. Adjectives that end in a vowel plus L or N usually become feminine by doubling the consonant before adding E. Ending: el elle Adjective: personal personnel Masculine singular personnel Feminine singular personnelle Masculine plural personnels Feminine plural personnelles Ending: on onne Adjective: good bon Masculine singular bon Feminine singular bonne Masculine plural bons Feminine plural bonnes Adjectives that end inà erà orà età need aà grave accent: Ending: er re Adjective: expensive cher Masculine singular cher Feminine singular chre Masculine plural chers Feminine plural chres Ending: et te Adjective: full complet Masculine singular complet Feminine singular complte Masculine plural complets Feminine plural compltes Other final letters lead to very irregular feminine endings: Ending: c che Adjective: white blanc Masculine singular blanc Feminine singular blanche Masculine plural blancs Feminine plural blanches Ending: eur euse Adjective: flattering flatteur Masculine singular flatteur Feminine singular flatteuse Masculine plural flatteurs Feminine plural flatteuses Ending: eux euse Adjective: happy heureux Masculine singular heureux Feminine singular heureuse Masculine plural heureux Feminine plural heureuses Ending: f ve Adjective: new neuf Masculine singular neuf Feminine singular neuve Masculine plural neufs Feminine plural neuves Irregular plurals: The endingà alà changes toà auxà in the plural: Adjective: ideal idal Masculine singular idal Feminine singular idale Masculine plural idaux Feminine plural idales Note: Most of the above rules are the same forà making nouns feminine and plural. Irregular French adjectives There are several French adjectives which have irregular feminine and plural forms, as well as aà special formà when they are placed in front of a masculine noun that begins with a vowel or aà mute H: a handsome man un bel homme an old friend un vieil ami Adjective Singular masc vowel/H Singular fem Plural masc Plural fem beautiful beau bel belle beaux belles new nouveau nouvel nouvelle nouveaux nouvelles crazy fou fol folle fous folles soft mou mol molle mous molles old vieux vieil vieille vieux vieilles Position of French Adjectives In English, adjectives virtually always precede the nouns they modify: a blue car, a big house. In French, adjectives may be placed before or after the noun, depending on their type and meaning. This concept can be aggravating for French learners, but with patience and practice youll be able to describe any object like a natural. The following explanations should cover about 95% of adjectives, but, alas, there are always some exceptions. Placement After the Noun Mostà descriptive adjectivesà are placed after the noun they modify. These normally have an analytical meaning, in that they classify the noun into a certain category. These types of adjectives include shape,à color, taste,à nationality, religion, social class, and other adjectives that describe things likeà personalityà andà mood. round table une table ronde black book un livre noir sweet tea du th sucr American woman une femme amricaine Catholic church une glise catholique middle-class family une famille bourgeoise In addition,à present participlesà andà past participlesà used as adjectives are always placed after the noun. interesting story une histoire intressante lively debate un dbat passionn à à Placement Before the Noun Certain adjectives are placed before the noun, some which you can memorize with the acronym BAGS: B Beauty A Age G Good and bad S Size (except for grande with people, see below) These descriptorsââ¬âand a few othersââ¬âare considered inherent qualities of the noun: pretty girl une jolie fille young man un jeune homme new house une nouvelle maison good child un bon enfant small problem un petit problme sincere condolences les sincres condolances vague promises les vagues promesses kind boy un gentil garon In addition, all non-descriptive (i.e.à demonstrative,à indefinite,à interrogative,à negative, andà possessive) adjectives are placed before the noun: these books ces livres each person chaque personne which pen? quel stylo ? no woman aucune femme my child mon enfant Placement Depends on Meaning Some adjectives have both a figurative and an analytic (literal) sense and can thus be placed on either side of the noun. When the adjective is figurative, it goes before the noun, and when its analytic, it goes after the noun. Figurative: my green (fruitful) years mes vertes annes Literal: green vegetables des lgumes verts Figurative: a great man un grand homme Literal: a tall man un homme grand Figurative: a sad (mean or bad) person un triste individu Literal: a sad (crying) person un individu triste Figurative: my old (former) school mon ancienne cole Literal: my old (aged) school mon cole ancienne Figurative: a certain (type of) look un certain regard Literal: a certain (assured) victory une victoire certaine
Thursday, December 26, 2019
How Much Has American Schooling Changed Since The Early Days
For as tough as American schooling is now, it could be a lot harder for todayââ¬â¢s youth. In the past, schools were very strict and harsh on the students. Whereas, today we have very lenient punishments, and rules are upheld depending on teacher discretion, due to looser guidelines which have evolved with the times. We as American minors have many different options of schooling; private, online, advanced (stem), public and homeschooling. Therefore, this gives students an opportunity to learn at their own pace and be in a comfortable environment, which is very effective and stimulates to the brain. Although the real question is how much has American schooling actually changed since the early days? One room school houses where the real startâ⬠¦show more contentâ⬠¦The students were respectful and fearful. Therefore they didn t make too much trouble for her. You didnââ¬â¢t speak unless spoken to, or you rose your hand. Then, if she called you, you would have proceeded to s tand, walk to her desk, politely and formally ask what you intended to do. Since the teachers desk was on a platform, she was always able to see most to all of her students and since she was above them, literally, every fiber of her being was screaming authoritative figure to her students. Punishment! A word that we all shy away from, but do we really know what punishment meant to kids who went to school in one room school houses? They endured many physical punishments, such as hitting the child on the knuckles with a steel tipped ruler or standing for a long period of time with your arms straight out in front or to the sides of you or even having to take cold showers. Although some teachers preferred the mental embarrassment route which included, wearing a dunce cap, being forced sit on a high stool beside the teachers desk at the front of the room or if it were a boy they would have banished them to the girls cloak room. The important information is what made them get in trouble. Things like not properly addressing the teacher as maââ¬â¢m or miss, speaking out of line, or anything that was considered disrespectful such as not standing up when addressing the teacher, or using slang and not proper English. The point is these were very
Wednesday, December 18, 2019
The Effect Of Testing On Mechanical Properties Of...
Assignment 1 MATS4006 Polymer Science and Engineering II S2, 2014 Prajna Tanuwijaya Z3423370 School of Materials Science and Engineering The University of New South Wales 5th September 2014 Effects of Testing Parameters on Mechanical Properties of Polypropylene Abstract Polypropylene being often used as products with live hinges and outdoor usage, is crucial to learn the limit of how it performs under various circumstances such as extreme temperature or the frequency and speed on how it is being moved. Its breaking force are also affected by those parameters. Hence it is important to study how to maximize the usage of the materials. Experiments include tensile test, Charpy impact test and Shore hardness test. Introduction Polypropylene is a thermoplastic used in applications such as packaging, automobile parts, carpeting, and a lot more application where it involves shearing movements. There are three types of polypropylene: homo polymer, block copolymer and random copolymer. In this case, random copolymer polypropylene is used as it can be used for injection molding and application that needs high impact strength. Polypropylene is a widely used commodity plastic with high chemical resistance. Being used widely due to its properties such as good tensile strength, fatigue and heat resistance besides having very high chemical resistance and used in food industry, also have very low water absorption. In this experiment, we are studying the effect ofShow MoreRelatedThe Effect Of Kaolin On The Mechanical Properties Of Polyethylene Composite2026 Words à |à 9 PagesEFFECT OF KAOLIN ON THE MECHANICAL PROPERTIES OF POLYPROPYLENE/ POLYETHYLENE COMPOSITE MATERIAL Samir Nassaf Mustafa ABSTRACT :- In this work, the mechanical and water absorption properties of polymer blend polypropylene (PP) and low density polyethylene (LDPE) at constant ratio (50/50) composites as a function of kaolin powder weight content in the grain size (100,120 à µm) were investigated. Polymer composite was fabricated by mixing polymer blend ( PPLDPE) with (0, 1, 3 ,5, 10, 14) wt.% of kaolinRead MoreTensile Testing : Tensile Test For Composites Essay1989 Words à |à 8 PagesMATERIALS CHRACTERIZATION: 1. Tensile Testing: Tensile test for composites was conducted according to ASTM D 638 - 99, with a Universal Testing Machine (Zwick Co.). Tensile test was carried out at crosshead speed of 50mm/min at room temperature. 2. Izod Impact Testing: In order to measure the work of fracture (WOF), the Izod impact test was carried out.Impact bars were obtained by cutting specimens in rectangular shapes. These rectangular specimens are of thickness 3 mm, width 12 mm and lengthRead MoreErosion Efficiency And Scanning Electron Microscopy ( Sem ) Of Textile Material Reinforced Polymer Composites1584 Words à |à 7 PagesErosion Efficiency and Scanning Electron Microscopy (SEM) of Textile Material Reinforced Polymer Composites Sachin Tejyan Department of Mechanical Engineering, Maharaja Agrasen University, Baddi (H.P.) - India tejyan86@gmail.com Amit Singla Department of Mechanical Engineering, Maharaja Agrasen University, Baddi (H.P.) - India Abstract-- The objective of this paper is to demonstrate the usefulness of the erosion efficiency by considering the large body of data in the literature pertainingRead MoreHigh Performance Aromatic Polyimides ( Pis )2271 Words à |à 10 PagesPOLYIMIDE High-performance aromatic polyimides (PIs) possess various outstanding properties, such as high thermal, mechanical, and chemical resistance and a low dielectric constant. Therefore, increasing attention has been paid to the application of PIs to microelectronics, optoelectronics, and the aerospace industry [3]. It is possible to apply graphene on conducting electrodes and films, sensors, electromagnetic shielding materials and so on .In particular, polymerââ¬âgraphene composite materialsRead MoreBraun Ag: the Kf 40 Coffee Machine13786 Words à |à 56 Pages Design Management Institute Case Study Braun AG: The KF 40 Coffee Machine ââ¬Å"If weââ¬â¢re going to do it, weââ¬â¢ve got to quit stalling,â⬠exclaimed Albrecht Jestà ¤dt,1 head of development for a new coffeemaker at Braun AG. ââ¬Å"Iââ¬â¢ve said all I can about polypropylene, and Iââ¬â¢m convinced we can go with it,â⬠he added, taking another sip of his beer. At the end of a day in February 1983, Jestà ¤dt and his colleagues were discussing Braunââ¬â¢s newest design: an elegant, cylindrical coffeemaker, called the ââ¬Å"KF 40,â⬠destinedRead MoreBraun Ag: the Kf 40 Coffee Machine13776 Words à |à 56 PagesDesign Management Institute Case Study Braun AG: The KF 40 Coffee Machine ââ¬Å"If weââ¬â¢re going to do it, weââ¬â¢ve got to quit stalling,â⬠exclaimed Albrecht Jestà ¤dt,1 head of development for a new coffeemaker at Braun AG. ââ¬Å"Iââ¬â¢ve said all I can about polypropylene, and Iââ¬â¢m convinced we can go with it,â⬠he added, taking another sip of his beer. At the end of a day in February 1983, Jestà ¤dt and his colleagues were discussing Braunââ¬â¢s newest design: an elegant, cylindrical coffeemaker, called the ââ¬Å"KF 40,â⬠destinedRead MoreConcrete Materials For Building Materials Essay7548 Words à |à 31 Pagesof risk of exposing it to a high temperatures. The physical properties such as colour and mechanical properties such as strength and performance must have some changes. The chemical composition of the concrete also change considerably. The strength of concrete reduce with increasing of temperature and rate of strength loss is influenced by compressive strength of the concrete. Generally, concrete may provides the best resistance properties towards fire of any building materials. This good resistanceRead MoreThe Training Procedure For Pigeons2299 Words à |à 10 Pageslearning theory suggests that associative mechanisms can influence behaviour through either the activation of stimuli by Pavlovian conditioning or through instrumental conditioning. Pavlovian conditioning reflects the acquisition of motivational properties of a conditioned stimuli (CS) through its association with appetitive or aversive reinforcement; the unconditioned stimulus (US) as they are presented together (Balleine and Dickinson, 2002). In the Pavlovian training procedure for pigeons, theRead MoreSip (Cogongrass as Main Component of Biodegradable Plastic)2748 Words à |à 11 Pagesthatwere trapped on waterways and dams causes floods; plastics that were burned up causes air pollution and plastics that were collected on household are now in great concentration on landfills. Nowadays, t hese problems can be solved if not lessen the effect in the environment by the use of our advanced technology. Today there are some industries and factories that introduces biodegradable plastics. Biodegradable plastics decomposed much faster than the common plastic. The said product became the solutionRead MoreInvestigatory Project Homemade Bouncy Polymer6568 Words à |à 27 Pagesof matter, which need to be described using the concept of properties. Toys like silly putty are unique because of they have distinct properties that are different from the properties of other types of matter. There are two different kinds of properties, chemical properties and physical properties. Chemical properties are qualities that can be observed during a chemical reaction, like when vinegar reacts with baking soda. Physical properties are qualities that can be observed during physical change
Tuesday, December 10, 2019
Decision Support Tools for Tourism Industry- myassignmenthelp.com
Question: Discuss about theDecision Support Tools for Tourism Industry. Answer: Australias local government areas are some of the most eminent attractions for tourists from all over the world (Alizadeh Shearer, 2015). Tourism is an industry that is booming and shall bring in a lot of impact to the economy in the upcoming days (Cook, Hsu Marqua, 2014). Australia is filled with tourist attractions, the big tourist attractions are the one that are strategically placed in the country to drive in huge number of tourists. The business aspect to tourism is huge and it is estimated that the tourism will become one of the most dependable industries to provide economical support to a country. I propose to open up big tourist attractions in the LGA areas of the country. The two places that I propose to open up big tourist destinations are Sutherland Shire and City of Melbourne. The beach of Sutherland Shire has been selected to build the big tourist destination while in the City of Melbourne; federation square is the area where the big tourist destination shall be opene d up. The Sutherland beaches are pristine and they constantly attract the tourists as the beach remains the biggest of the spots for the tourists to hang around (Tomlinson et al., 2015). The popularity of the place will keep attracting more and more tourists from all around the world. I wish to open up a glass globe cafeteria and performance hall in both Melbourne city and Sutherland Shire beach. The Glass globe caf will be placed at the far end of a beach in Sutherland. The glass globe will have 3 sections in it. The topmost floor will be a cafeteria that will provide the people with a stunning view of the sea to enjoy while sipping their coffee. The place will have 3 floors in total. The ground floor will be a store for souvenir and other culturally exclusive products of Sutherland. The 1st floor of the glass globe will be a hall for the performance of arts such as theatre, dance, singing and film screening. The glass globe will be transparent and the entire interior should be visible from outside. The second floor shall be covered with blue mirrored glass that shall reflect the sea in the Sutherland beach and that will make it look mesmerizing. The sea is such an attractive point for tourists around the world that people are always expected to visit the beaches. The beauty of a beach caf that has a mesmerizing view of the sea shall be a constant attraction for all those who visit the Sutherland beach. The area of Sutherland that has all the beaches is popularly referred to as the shire. The shire is known to offer the best tourist places of the city and is close to the CBD of Sydney. The distance of the beach from the Sydney airport is around 25 minutes and hence it ensures that the flow of the tourists in the glass globe caf shall never dip as it is well connected to the city. Cabs, buses and shuttles are in plenty to reach the destination. The federation square of Melbourne is a place that is full of cultural exchange and intellectual communication between people. The area is a stage for all sorts of huge events that take place in the city of Melbourne (Johnstone, Caldwell Rittenbruch, 2015). The federation square is situated at the edge Melbourne CBD and hence is crowded by tourists and local alike anytime. The major events keep attracting people and it makes the area the place to hangout for all the visitors. A glass globe caf of the same model as in Sutherland beach will work successfully in the federation square. People will be glad to hang out in at the caf of glass globe and some of the events of cultural significance can be held at the performance hall that is at the 1st floor of the glass globe. The caf will provide a view of the events that are being held at the open in the fed square and it will make the people enjoy the view while sipping the amazing coffee. The business shall keep growing because events at the square shall never stop and the closeness of the point to the CBD of Melbourne further ensures that the area shall never be deserted. The entire place is filled with buildings that are made of glass and hence the glass globe shall match the areas architecture style and make sure that it stands apart from others. The transportation is well designed for the fed square as it is connected with shuttle cars, cabs and various other transports such as bus. As it is one of the most booming locations in the country, the mass of the tourists shall be directed to the area and the glass globe shall act as a big tourist destination that the people can witness and enjoy. I believe that the idea of a glass globe at both the locations will benefit the makers and make sure that high profits are achieved. The locations are selected in a way that the best of Australia is brought together and the idea of big tourist destination achieves success. The growth of such tourist destination like the glass globe at the tow mentioned locations is certain and the next 10 years shall show growth for the tourist destination. The architecture is has to be designed in such a way that the tourists interest about the location is piqued and the marketing team has to ensure that the place gets proper media attention so that it achieves popularity in the tourism sector of the country and the Local government areas of the country. Reference Alizadeh, T., Shearer, H. (2015). A snapshot of high-speed broadband responses at local government level in Australia: a marriage between federally funded initiatives and locally driven innovations?.Australian planner,52(1), 42-50. Retrieved from: https://research-repository.griffith.edu.au/bitstream/handle/10072/69789/102364_1.pdf?sequence=1isAllowed=y Cook, R. A., Hsu, C. H., Marqua, J. J. (2014).Tourism: the business of hospitality and travel. Boston, MA: Pearson. Retrieved from: https://fau.edu/academic/registrar/UUPCinfo/UUPCOct3-14/HFT1000syll.doc Johnstone, S., Caldwell, G. A., Rittenbruch, M. (2015). Defining the InstaBooth: Facilitating debate and content creation from situated users. InProceedings: MEDIACITY 5 International Conference, Workshops and Urban Interventions(p. 187). School of Architecture, Design Environment and i-DAT (Institute of Digital Art and Technology), Plymouth University.. Retrieved from: https://eprints.qut.edu.au/84383/1/MediaCity5_DefiningTheInstaBooth.pdf Tomlinson, B., Maynou, F., Sabats, A., Fuentes, V., Canepa, A., Sastre, S. (2015). Systems approach modelling of the interactive effects of fisheries, jellyfish and tourism in the Catalan coast.Estuarine, Coastal and Shelf Science. Retrieved from: https://www.researchgate.net/profile/Antonio_Canepa/publication/284235299_Systems_approach_modelling_of_the_interactive_effects_of_fisheries_jellyfish_and_tourism_in_the_Catalan_coast/links/565c33d108aefe619b2520fc.pdf
Subscribe to:
Posts (Atom)